Junichi Shimodaira's 1930 Ford

From Kustomrama
(Redirected from Rod Riguez)
Jump to: navigation, search
The second and most popular version of Rod Riguez.
Junichi removing the stock engine from the Model A frame. Photo courtesy of Junichi Shimodaira.
The stripped frame. Photo courtesy of Junichi Shimodaira.
Junichi Z'ing the front of the frame 4 inches. Photo courtesy of Junichi Shimodaira.
The rear of the frame was Z'ed 6 inches. Photo courtesy of Junichi Shimodaira.
The frame was boxed for additional strength. This photo shows templates for the frame pieces being made. Photo courtesy of Junichi Shimodaira.
Junichi grinding the welds after the frame had been boxed. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
A 1949 Oldsmobile Rocket 303 c.i. V8 engine was installed in the car. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
The stock grille shell and canted quad headlights mocked up. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Junichi had to cut out the firewall before he installed the body on the rolling chassis. Photo courtesy of Junichi Shimodaira.
The body was radically channeled over the Z'ed frame in order to get the car as low as possible. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
1959 Cadillac bumper parts mocked up as base for the canted quad headlight set up. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Junichi working on the taillight arrangement. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Junichi constructing the framework for the grille shell. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
The seats were made from scratch. Photo courtesy of Junichi Shimodaira.
Junichi working on the headers. Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Photo courtesy of Junichi Shimodaira.
Body primered and ready for paint. Photo courtesy of Junichi Shimodaira.
The first version of Rod Riguez made it's debut at the 2002 Yokohama Hot Rod Custom Show in December of 2002. Photo courtesy of www.mooneyes.co.jp.
Photo courtesy of www.mooneyes.co.jp.
The second, chopped and fendered version of Rod Riguez, at the 2003 Yokohama Hot Rod Custom Show. At the show, it won the 2003 Hot Rod Custom Show Best of Show, the George Barris' Pick Award, the Street Rodder's Pick Award and the Line Dr.'s' Pick Award. Photo courtesy of www.mooneyes.co.jp.
Photo courtesy of www.mooneyes.co.jp.
Photo courtesy of www.mooneyes.co.jp.
Rod Riguez as it sat in July of 2011. Photo by Bob Jensen.
Photo by Bob Jensen.
Photo by Bob Jensen.
Rod Riguez at the 2015 Grand National Roadster Show. Photo courtesy of Howard Gribble.

1930 Ford Model A Tudor Sedan owned and built by Junichi Shimodaira of Paradise Road in Nagoya, Japan.[1] The car, named Rod Riguez, is an iconic Japanese show rod that has attracted attention and publicity all over the world. Rod Riguez blends hot rod, custom and lowrider styling cues in a special way that for many has become the definition of a Japanes rod and custom. Rod Riguez has been one of the cars that paved the way for the Japanese rod and custom scene in the 2000s.


Junichi started the build in 2002 by reworking the original frame.[2] For a low stance, the height of the car was brought down by Z'ing the frame 6 inches in the rear and 4 inches up front. The frame was then boxed for additional strength before a 1949 Oldsmobile Rocket 303 c.i. V8 engine was installed between the frame rails. The engine was hooked to the original Hydra-matic transmission. A TCI dropped axle kit with GM Caliber disc brakes were installed up front, while a Chevrolet 10-bolt rear end with tube shocks and a TCI spring were installed in the rear. In order to get the car even lower, the body was channeled radically over the frame. With its new and bigger engine, the firewall had to be cut out before Junichi could fit the body on the frame. The leading edge of the cowl was reworked during the operation, and it received a peak on each side. A new nose, incorporating canted quad headlights, was made from 1959 Cadillac front bumper ends, round tubing and sheet metal. The grille opening was filled with expanded metal mesh and hardware store coat hooks. Inverted 1958 Chevrolet parking-light bezels were frenched into sculpted pods to serve as taillights. White glass with red bulbs was used in the taillights. For a show rod look, the engine received a fogged gold paint job, chromed valve covers, a custom dual-inlet carburetor scoop, custom made rippled headers and plenty of chrome. A 1968 Ford Mustang radiator was mounted behind the wild nose. Inside, the dash and gauge panel were left mostly stock, but Junichi made new seats from scratch that were mounted to the floor.[3] Once completed, the first version of the Rod Riguez made a dazzling debut at the 2002 Yokohama Hot Rod Custom Show in December of 2002. This version was fenderless and unchopped featuring a panel painted flat gold paint job and chromed steelies with wide whitewall Firestone bias ply tires. At the show, Junichi won the Street Rodder's Pick Award, and the Best Street Rod and the Best Body Work award.[4]


After the show, Junichi continued to work on the car, and he tore it down for a redo. The top was chopped in a unique wedge fashion. The rear of it was left at stock height, while the A and B pillars were cut four and two inches to bring the top down at a rakish new angle.[3] Junichi wanted to run fenders, but he didn't want to add running boards, so he crafted some wildly sculpted fenders out of metal. Front fender mounts were made from reinforced steel in a spider-web design. The mounts were chromed before Junichi installed them on the car. The second version was fit with a new grille insert fabricated from square tubing as well. A gold R was placed in the center of the new grille insert. Inside, new custom made seats were installed along with a cut down early 1960s Ford steering wheel. The car received a gloss Tequila Gold paint job and pinstriping by Makoto. As Junichi has a love for the Chicano low-rider culture, a Mexican wearing a sombrero was pinstriped on the rear of the car. The wide white wall tires and chromed steelies were replaced by Cragar Star Wire Wheels that ran 1960s style white stripe tires.[2] The second version of the Rod Riguez returned for the 2003 Yokohama Hot Rod Custom Show. At the show, Junichi won the 2003 Hot Rod Custom Show Best of Show, the George Barris' Pick Award, the Street Rodder's Pick Award and the Line Dr.'s' Pick Award.[5]


In 2005 Junichi shipped Rod Riguez to the US, so he could enter it at the 2005 Grand National Roadster Show and attend the 2005 Cruisin' Nationals in Paso Robles with it. The car stayed in the US, and in October of 2005, Junichi sold Rod Riguez to Chuck Schauwecker of Carson, California.[6]


Magazine Features

Cruisin' February 2003
Hard Core Rod&Kustom Premier Issue


References




 

Did you enjoy this article?

Kustomrama is an encyclopedia dedicated to preserve, share and protect traditional hot rod and custom car history from all over the world.




Can you help us make this article better?

Please get in touch with us at mail@kustomrama.com if you have additional information or photos to share about Junichi Shimodaira's 1930 Ford.


This article was made possible by:

SunTec Auto Glass - Auto Glass Services on Vintage and Classic Cars
Finding a replacement windshield, back or side glass can be a difficult task when restoring your vintage or custom classic car. It doesn't have to be though now with auto glass specialist companies like www.suntecautoglass.com. They can source OEM or OEM-equivalent glass for older makes/models; which will ensure a proper fit every time. Check them out for more details!

Do you want to see your company here? Click here for more info about how you can advertise your business on Kustomrama.


Personal tools
Help us
facebook